Infinity Landscape 3 Piece Dash Kit (Printed Series) - 2021+ Bronco
Earn [points_amount] when you buy this item.
- Various designs to customize your dash
- Easy to apply
- Installation video below
Earn [points_amount] when you buy this item.
Customer feedback led us to some more products as usual! These landscapes dress up your plain dash without getting in the way of the airbag. Give your passengers something a little more interesting to feast their eyes on.
Currently fits ALL 2021+ Broncos. Matte finish.
NOTE: We took into consideration airbag deployment and kept our designs low on the dash to prevent interference.
While StickerFab caters to a large number of people, it is still possible to customize some orders. Ideas that have broad appeal are the best! However, if you have some art work, we may be able to do a special print just for you.
Please refrain from submitting trademarked content unless you have the rights to it. We are located in Fort Myers, FL if you are interested in helping us create custom templates for other vehicles or trim levels.
Use our contact form to get in touch with us.
Please watch the video above. This install is fairly simple and straightforward. Just make sure you align the cutout first and go from there.
You will want to do this in 70-80 degree weather ideally. Stay in the shade unless it is a little on the cool side. You may elect to do this install after a drive to get the interior temperature in the target area. If your vehicle is running please make sure you are in a well ventilated area.
Recommended items:
Prep by cleaning them thoroughly. You can use isopropyl alcohol, however if it is cold or humid, please wait a few minutes to make sure that they area is dry.
We recommend a wet install. Clean your hands as you will be touching the back of the vinyl a little.
Spray the application area and the back of the vinyl with your fluid. Once the alignment is correct, push out the air and fluid with your fingers. Use firm pressure to activate adhesive for the final pass. For trouble spots and a final pass, use your squeegee. If it is cooler outside, use heat to activate the adhesive as well.
Sometimes you will have to wait for the edges to be able to adhere due to the use of application fluid. You can speed up the drying process with LIGHT heat.