Makes wet installs of vinyl products MUCH easier
1x 50ml spray bottle of StickerFab Application Fluid
1x felt lined squeegee
1x Chemical Guys microfiber towel

StickerFab Essential Vinyl Installation Pack (w/ Chemical Guys Microfiber)

These are a combination of the most essential and commonly used items for installing vinyl. You will be doing yourself a disservice by not having these items around when performing a wet installation.

Includes:

1x 50ml spray bottle of StickerFab Application Fluid
1x felt lined squeegee
1x Chemical Guys microfiber towel

Take a moment to read up on all these items:

Application Fluid (50ml)

This is the application fluid you were looking for. Better than any mixture of soapy water, it allows for easier installations in a slightly wider range of temperatures.

It turns novices into at least intermediate level installers. The initial surface tension of the sticky vinyl gets broken so you can dial in your alignment. Push the fluid out and you are left with a spot on install.

Non-flammable.

INSTRUCTIONS

Shake before use. Use in the shade if it is sunny and warm.

We recommend you clean the installation area with this application fluid OR a detail spray that doesn't have wax and THEN this application fluid if the area is really dirty. Use a microfiber cloth to wipe dry. Spray the back of your vinyl and then proceed like we instruct you in many of our installation videos. Align, install, and squeegee or push out the remaining application fluid from under the vinyl. Allow to dry. Use of LIGHT heat can accelerate the initial bonding period.

If used with transfer tape, be sure the vinyl is dry enough to peel back the transfer tape without removing the vinyl (2-3 minutes after pushing as much application fluid out as possible).

Felt Lined Squegee

This felt lined squeegee aids in protecting vinyl while allowing you to place firm, even pressure.

These characteristics make it ideal for larger vinyl pieces. Aids in preventing bubbles from getting trapped between vinyl and application area.

Soft edge aids in preventing damage to vinyl.

Chemical Guys Professional Grade Premium Silk Banded Microfiber Towel

Use This Microfiber Towel To:

Perfect for final-touch buffing & wiping
Have lint free & scratch free results
Silk edges further reduce scratches
Prevent scratching and swirling
Clean up life's messes and spills quickly
Dry down that fuzzy pup after a bath or playing in the yard

How To Wash Microfiber Towels:

1. Separate microfiber towels by type into designated wash & dry loads
2. Machine wash microfiber goods with Chemical Guys Microfiber Wash and HOT water
3. Add 1 ounce for small wash loads; 2 ounces for medium loads; or 3 or more for large wash loads
4. Machine dry microfiber goods on LOW heat

Do NOT use fabric softeners or dryer sheets.

Don't settle when it comes to your ride, look for the Chemical Guys branded silk edges to protect your paint.

2022 Ford Maverick

Currency