Topographic Map Fuel Door Overlay - 2024+ Land Cruiser
€19,95 EUR
Earn [points_amount] when you buy this item.
- Topographic map design
- Install video below
Couldn't load pickup availability
Earn [points_amount] when you buy this item.
Couldn't load pickup availability
This fuel door overlay is just a unique touch to add to your vehicle. If you have some other design ideas that may have wide appeal, please contact us.
Black with Clear Lines - The clear lines get filled in with your vehicle's paint so it's a perfect paint match! If you have a darker color vehicle, please contact us about printing this with specific line colors.
Please use the two videos on this page to help guide you through your installation.
Clean the application area and apply the vinyl using wet installation. Make sure the area is clean and free of dust, debris, dirt, Armor All, etc.
Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
Try doing the install in the shade so it doesn't heat up the vinyl rapidly. Please watch our video for a detailed installation.
Keep a dish of soapy water (1 or 2 drops of dish / hand soap with a couple cups of water) around. You will want to wet the fuel door and the back of the vinyl.
Also recommend using a felt tip squeegee. In this video we swap out the soapy water with a product called Rapid Tac. You can also use our pre filled bottles of StickerFab Application Fluid.
Removal
To remove after item has been installed for a while, please use Goo Gone and a clean towel / paper towel. This will dissolve the remaining adhesive. Be sure to rinse / wash the area after removal.