Easy to apply
Over 130 labels
Fits OEM upfitter switches
Fits 2024+ Ranger Raptor also

Printed Series Auxiliary / Upfitter Switch Labels

The convenience of the auxiliary switches in the Ford Bronco is relatively unquestioned. They are labeled Aux 1-6, but unless you have memorized each location, you might forget a switch or two. Asking someone else to turn something else on for you? Well forget about it unless you start labeling.

We're giving you a variety of options from normal to photoluminescent (glow in the dark).

The inks are rated for 3 years of outdoor use, but in this application they are mounted inside and are generally protected from UV exposure.

For flat mounting, please read our information about our new chicklets.

UPDATE 12/19/23): Now we offer a flat mounting solution via our acrylic chicklets.

UPDATE (11/11/23): Symbols only version has been created. This is on black background with a variety of larger symbols. Minimal amount of letters.

UPDATE (1/22/22): The lamination adds 2.5 mil thickness and protects the printed surface. This can further increase the durability. Adds 4 years of outdoor durability, but again this is in a generally protected area.

UPDATE (3/29/22): Current V3 version is in first photo. This is what is currently shipping to customers.

UPDATE (4/03/23): Some silly labels removed and swapped out with ones like front and rear locker. Non-laminated styles removed. Both to delivery only the higher quality, thicker ones, and also to streamline fulfillment.

NOTE: Photoluminescent paper needs to be charged with a bright light source for 5-10 minutes to sustain its glowing appearance. Shining a light on it briefly will result in light, but that light will be relatively brief (minutes).

Last but not least, thank you Sean (Natai on Bronco6G) for these awesome designs. Without you this wouldn't have happened.

INSTALLATION

Clean the application area to prepare it for installation. We'll be doing a dry installation.

NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Some will choose to clean the application area with rubbing alcohol which is okay.

"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."

Microfiber
Detailing Spray
Heat Gun or Hair Dryer

Keep a hair dryer around if you want to apply light heat to dry it out once properly aligned. Otherwise you can park it back in the sun and push down the corners. Please make sure all the letters are dry before driving the vehicle.

Applications

2021+ Ford Bronco

2021+ Ford F-150 Tremor

2021+ Ford Raptor

2021+ Ford Ranger Tremor

2023+ Super Duty F-250, F-350, etc

2024+ Ranger Raptor

2024+ Ranger

Currency