Easy to install (video below)
Tint and solid options
Sold as a pair (one backup)

Ford Bronco Oval Emblem Overlay (Tint / Solid)

Here's our new way of slightly modifying the OEM oval emblem on the back of the Ford Bronco. This tint goes over the stock emblem and knocks out some of the chrome to make it all more subtle.

Choose from a variety of finishes to create your desired look. Installs just like our other overlays.

Sold as a PAIR. One product with backup.

NOTE: This only goes OVER your OEM emblem. You must have an OEM emblem in good condition to install this. Smoked options are TINT. Solid options are Black (Gloss) and Black (Matte).

AVAILABLE MATERIALS

Dark Smoke - Standard dark smoke material. Made in Germany.
Dark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA.
Light Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA.
Light Smoke - Standard light smoke material. Made in Germany.
Dark Smoke Stealth - Premium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA.
Dark Smoke Honeycomb - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Modified light pattern when lit. Made in the USA.
Dark Smoke Carbon Fiber - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Modified light pattern when lit. Made in the USA.
Dark Smoke Galaxy - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). A galaxy full of metallic flake in the light. Appears similar to standard dark smoke when backlit. Made in the USA.
Red - Standard red material. Made in Germany.
Yellow - Standard yellow material. Made in Germany.
Black (Gloss) - Solid gloss black. You can see the indentation of the stock Ford logo, however no light is allowed to pass through.
Black (Matte) - Solid matte black. You can see the indentation of the stock Ford logo, however no light is allowed to pass through.

Other Rear Oval Overlay Options

Instructions

Use this video and the notes below to properly install this product.

Items you may want to have:

Detail Spray (without wax)
Microfiber Towel or Paper Towel
StickerFab Application Fluid or dish with soapy water (drop of dish soap + 1-2 cups of water)
Heat gun or hair dryer

Clean the application area to prepare it for installation. Do not use a spray with any type of wax in it. Ideal install temperature is between 75-85 degrees. If it is really warm, do the install in the shade.

A wet installation is recommended. Use our application fluid or slightly soapy water on the back of the vinyl. This will allow you to move the vinyl around and find the correct alignment. Once aligned, use your fingers to push out the water/air. Use light heat as needed to make sure that the overlay does not crease and adheres properly to the OEM emblem.

2021+ Bronco Exterior Vinyl

Currency