Adds protection
Reduces fingerprints
Optional matte anti-glare finish

INNOSURE Glass and Film Screen Protectors for 11.6" 2022+ WRX / Crosstrek

These are low cost solutions to protect your investment, lower fingerprints, and optionally reduce glare.

Installation is easy and straightforward.

Installation

1. PREPARE: Open the package, close the window, confirm the interior space dust-free. Check the right direction & positions the glass should to be.

2. CLEAN: Set the screen to clean mode, first clean the screen with a alcohol wipe, then the microfiber cloth, and lastly use the dust absorber remove all dust remaining.

3. HOLD (Optional): Use the sucker on the front side to help hold the glass.

4. PEEL: Gently peel off the glass's back released film/board and hold the border or by sucker, not touch the glue zone anywhere.

5. CHECK: Check again any dust may rest on the screen at different direction sight, use the absorber dab out every one.

6. ALIGN: Slowly align the glass to let it close to the screen from one side, make sure the glass was set the fully right position. Press lightly on the midline of the glass to let it absord to the screen automatically.

7. REMOVE: (Lift up the sucker) Remove the bubbles using the provided squeegee or cloth coated credit card. For stubborn bubbles carefully lift up the glass (most close to the bubble) all the way to the bubble and re-apply.

INNOSURE

Currency