Topographic Map Pillar Overlays - 2024+ Crosstrek
€27,95 EUR
Earn 151 Points when you buy this item.
- Cost effective way to change up the look
- Easy to install
- B / C / Rear Window Options
Earn 151 Points when you buy this item.
This design is being requested for a few vehicle models and the 2024+ Crosstrek is one of them. We have an overlay for the B Pillar, C Pillar, and rear window.
Give your vehicle a little rugged, outdoorsy look. Great for those who enjoy staying off the beaten path.
Items are fully color printed and installed as a single piece. No difficult alignment of transfer paper is required.
B Pillar - Located between the front and rear doors (set of 4 pieces)
C Pillar - Located at the rear of the rear doors (set of 2 pieces)
Rear Window - The smaller window located between the C pillar (set of 2 pieces)
Clean the application and surrounding areas prior to applying. We recommend the following items for installation:
The optimal installation temperature for these products is 75-85 degrees. Park the vehicle in the shade unless it is on the cooler side. If the material heats up too much, it will become overstretched easily.
You can wet the back of the vinyl with a drop of dish soap in a cup of water or preferably the StickerFab Application Fluid. This allows you to slide the vinyl around into the right position. Once you have found that position, use your fingers to push out the soapy water. Then use the felt tip squeegee to push out the rest. Allow to dry. LOW heat can be used to dry out the vinyl quicker.
This video shows you how to work with vinyl.