Earn 276 Points when you buy this item.
This topo theme is popular in the off-road community if you can get your hands on the right designs and templates. We are covering the plain, easy to damage plastic door cards in some topological map vinyl overlays.
This material is specially designed to stick to textured plastic. It's easy to install and can cover up minor imperfections and discolorations.
Currently fits ALL 4 door 2021+ Broncos. Matte finish.
Topo
While StickerFab caters to a large number of people, it is still possible to customize some orders. Ideas that have broad appeal are the best! However, if you have some art work, we may be able to do a special print just for you.
Please refrain from submitting trademarked content unless you have the rights to it. We are located in Fort Myers, FL if you are interested in helping us create custom templates for other vehicles or trim levels.
Use our contact form to get in touch with us.
This special use material is extremely sticky so be careful while handling it. You do not want it to get stuck to itself.
See overview / install video above. NOTE: All topo vinyls are shipped in tubes to prevent damage. Prior to install, lay out all of these items and make sure they are flat prior to install.
You will want to do this in 75-85 degree weather ideally. Stay in the shade unless it is a little on the cool side.
Recommended items:
Prep by cleaning the install area thoroughly. You can use isopropyl alcohol, however if it is cold or humid, please wait a few minutes to make sure that they area is dry.
We recommend a WET INSTALL for the uppermost portion. This will allow you to align the item correctly. Then as it dries you can push down the edges.
We recommend doing a DRY INSTALL for the straight piece that goes above the arm rest, but be careful not to crease the vinyl. This material is pretty forgiving if installed under the right temperatures. You can lift the vinyl multiple times to reposition. Once the alignment is correct, push out the air with your fingers. Use firm pressure to activate adhesive for the final pass. If it is cooler outside, use heat to activate the adhesive as well.
